AES 7170 Manuale Utente Scaricare il pdf (Pagina 30)

40-7705I-UM Page 30 Rev 4 March 16, 2007

5.18 User Logout from directly attached keyboard & monitor:

You should log out the user that is logged in (usually root), when local access

using the directly attached keyboard, monitor and mouse, to your system is no

longer need. Depending on where you are and what you are doing the procedure

will vary. Several options are outlined below.

Option 1: Logout (preferred method)

With this option you will log out and go back to the aes login screen.

1. If you are at a command line prompt and not running the MWM GUI, then

go to step 3.

2. If you are in the MWM GUI, first select Quit… from the AES Menu.

Confirm by clicking OK or press <Enter>.

Select Quit… Menu item

Then click OK or press <Enter>

3. Enter one the following commands at the

command prompt:

logout<Enter> or exit<Enter>

4. The screen should return to the aes login prompt.

Option 2: Reboot server

1. The system will accomplish a logout when you reboot the MultiNet

receiver. This will restart the server stopping at the aes login screen.

Be careful if you are rebooting an active MultiNet Receiver as signals may

be processing and a reboot could delay or terminate that process. Other

users may also be connected and this will disconnect them possibly

interrupting their work or cause loss of data.

To reboot do one of the following:

a. From the command line prompt enter the following:

reboot<Enter>

b. From the MWM GUI, select the “Reboot Server!” item in the AES

Menu accessed by right clicking on the MWM desktop

Select Reboot Server! Menu item

2. This process should leave a properly configured MultiNet receiver and its

programs running allowing remote access by the super user root via VNC

on display 1, as well as any other users that were properly created.

5.19 User Logout from Workstation Access:

If you need or want to logout from the workstation access session, simply close

the program you are using to establish that access. For example: If using VNC

Viewer, close the program by clicking on the X in the upper right corner of the

VNC window. The password will be required the next time you attempt access.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 110 111

Nessun commento

AES 7170 Manuale Utente Pagina 30