AES 7170 Manuale Utente Scaricare il pdf (Pagina 89)

40-7705I-UM Page 89 Rev 4 March 16, 2007

• Select ALARM and/or ZREST plus desired Zones if Forwarding

Alarm data is the objective.

• Select as desired any other type of data or feature that you want

forwarded. The following options are available: In some cases the

only information forwarded is a message indicating that a packet of

the selected type was sent and not the data itself,

STAT → Subscriber Status

CHKIN → Check-In

DATA

HPBU → Programming Uploads

TEST Data

ZDATA → Zone Data

VLS → Vehicle Location Data

TEXT → Text Message

• Other Options: The following additional features can be activated

for forwarding. These require specific units and capabilities at the

Forwarded to site to be accepted and properly handled.

o Alarm Automation Message: Alarm activity can be

transmitted to the remote unit in Alarm Automation Format.

The RS-232 output of a special "FA" or "FAA" 7050-DLR

receiving unit can feed alarm data directly to a computer

running automation software. Sending these specially

formatted packets to a subscriber that is not intended to receive

it will cause the packet to be rejected.

o Relay Following: This special function requires the Forward-

To unit to be a 7050-DLR subscriber unit with a 7065 Relay

Output board installed. When programmed for forwarding

with relay following and a zone in alarm message is received

from the origin unit, a relay control command is sent to the

receiving unit to activate a relay. Zone 1 in the origin unit trips

relay 1 in the forward-to unit, zone 2 trips relay 2, and so on.

- For 7050 version 2 and later, the relay is momentarily

activated for 1 second. Be aware that the relay may activate

more than one time but should always return to a Normally

Open State

- r 7050 version prior to 2 the relay is toggled. Be aware that

you cannot be sure if the relay will be left open or closed.

Only that it will change state at least once.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 110 111

Nessun commento

AES 7170 Manuale Utente Pagina 89