AES 7170 Manuale Utente Scaricare il pdf (Pagina 68)

40-7705I-UM Page 68 Rev 4 March 16, 2007

11.3 Using the pick list pop up to Select a Subscriber ID

When a function is chosen from a function group, a “pick list pop-up”

appears.

You can type in the ID number of the Subscriber unit you wish to contact.

Or use the arrow key to highlight the appropriate ID number and then

press <Enter> to select it.

Figure 11-3 Pick list pop-up

11.4 Selecting a Route for Communication with a Subscriber Unit

Since each subscriber unit in your AES•IntelliNet system acts as a radio

repeater, there may be many routes for messages to travel from its source

to the Linux Server via the IP-Link(s). Each time a message is received

from a unit, the software extracts the subscriber unit ID number of the

origin, and the ID number of repeaters in the message’s route. That route

information is stored in a database and can be used to select an outbound

route whenever an operator sends data to a subscriber unit from the Linux

Server.

Figure 11-4 Select a Path

Once you have selected the subscriber unit number, the basic routing pop-

up appears (shown above). You may communicate with the unit through

its most recent route, through its next most recent route, through its most

frequently used route, or you may manually enter a route.

To choose the most recent route of communication, simply press <Enter>

or check the first box. The “last” route, or most recent route, is the default

setting on this popup. To select the second most recent route, select the

most recent route, and the same for the most frequent route.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 110 111

Nessun commento

AES 7170 Manuale Utente Pagina 68