AES 7170 Manuale Utente Scaricare il pdf (Pagina 33)

40-7705I-UM Page 33 Rev 4 March 16, 2007

6.1 Server Configuration

Among the first parameters that must be configured are on the Server

Configuration page. AES ships the receivers pre-configured as indicated

throughout this manual. To review or edit the parameters, access the

Admin GUI Server Configuration screen as indicated above and click on

"Server Configuration" on the left hand side of the screen. This brings

you to the AES Server Configuration screen, where you modify as needed

the following parameters:

Figure 6-3 AES Server Configuration Screen

• Server ID Number: Identification number of your MultiNet Receiver

(server). Unless you are running more than one server at your site, we

recommend using the default value of 0001. Use 0002 for the second.

Each needs a unique ID. Range is decimal 0001 to 9999.

• IP-Link Port Number: Port used by your IP-Link Transceiver(s) to

connect to the server. Default and suggested value is 7070.

• Modem Device Path: Unix path used by the modem in your IP-Link

Transceiver. Default is “/dev/ttyS3”. Unless you are very well versed in

Linux and the hardware of this receiver, do not enter anything else here

unless directed by AES Technical or Engineering Support.

• LCD Device Path: Unix path used by the LCD in your IP-Link

Transceiver. Default is “/dev/ttyS2”.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 110 111

Nessun commento

AES 7170 Manuale Utente Pagina 33